Wireless infrared (PIR )detector (ZC-S002)

Wireless infrared (PIR )detector Feature:
1. Tamper switch: it will send alarm signal if cover is disassembled
2. Preset coding with the control panel: Switch the protection zone to "ON" press the tamper switch and send wireless signal, the control panel sounds, it means that coding is completed matched.(refer to the coding rogram of control panel operation instruction and relative detector).
3. Low battery alarm: when battery is low voltage, the human being body moving, LED flashes five times. In static environment, it is not activated.
4. Coding address: preset by manufacture or by user.
5.Protected time choosing: 3 seconds or 30 seconds, it is preset by playing pins.
6. Compatible with many control panel.
Wireless infrared (PIR )detector Specification:
Power supply: 9VDC alkaline battery 500mAh
Working current: static < 30uA; alarm < 16 mA
Wireless parameter: frequency 315MHz or 433MHz, Transmitting distance >150 m (wide area without interfere)
Detecting range: horizontal 110° Vertical 90°
Working condition: working temperature: -10 celsius degree~55 celsius degree . Product size: 89.5*53*39mm

Install Locationfor the PIR Detector :

1).Make sure the detector covers all the areas which should be covered.
2).The recommended installation height should be around 2.1M, depending on the area to be covered.
3).To improve the detection accuracy, the detector should be kept away from heat sources, light sources, and direct sunlight through the window. The IR detector is activated by detecting an energy difference between the IR light of a moving object and that of a background object. To obtain the maximum accuracy, please focus the detector on the spot with the lowest temperature within the covered area. (Please refer to Figure 6 for installation)